Factory Flaws

More
12 years 3 months ago #2373 by buzzer999
Factory Flaws was created by buzzer999
Here is a photo of a 166 Sunbeam Rapier with a portion of the pillar on the drivers door missing. It is completely painted over so it must have left the factory like this.Dave

Please Log in or Create an account to join the conversation.

More
12 years 3 months ago #12374 by buzzer999
Replied by buzzer999 on topic Factory Flaws
Another flaw, this time on my 482 Bedford CA Van 'Dinky Toys', notice the large mark on the front wing. Again it has been painted over and managed to get out of the factory. Dave

Please Log in or Create an account to join the conversation.

More
12 years 3 months ago #12380 by starni999
Replied by starni999 on topic Factory Flaws
Hi Dave, Great and interesting pair. To be honest I think it's a testament to Meccano's QC (especially on piecework!)that we don't see that many of these, compared to the millions of models produced, compared to other manufacturers Dinky's with major faults escaping the factory seem very scarce. Maybe a few more did get out there, but were returned by the shops that wouldn't sell them? Be interesting to see if anyone else has some? Chris Warr.

Please Log in or Create an account to join the conversation.

More
12 years 3 months ago #12385 by janwerner
Replied by janwerner on topic Factory Flaws
There is a 'Factory Errors' thread already, Dave! Difficult to manage such a structureless forum like this ... Kind regards, Jan

Please Log in or Create an account to join the conversation.

More
12 years 3 months ago #12401 by dinkyfan
Replied by dinkyfan on topic Factory Flaws
Here are a few flawed items from Dinky that I have acquired over the years. The first one is the Austin Taxi in the two-tone version. And it has absolutely lovely paint on it, with nary a flaw, but notice that the left front fender area, just left of the radiator has a pretty severe casting flaw. It almost looks like the molten metal did not fully fill or harden correctly. But it somehow went through QC and was then painted....so it was missed twice...after casting and after painting! The other one is not a casting flaw, but a damaged area none the less. This is the Studebaker Golden Hawk, and I purchased this one directly from H. Hudson Dobson around 1959 or so. The right rear tail fin, right at the tip, is bent and cracked. I am guessing that it was dropped, possibly before being put into its box. I notice it as soon as I opened the box the first time, so I know I did not do it. But another missed QC item!Lastly is the French Dinky Chrysler convertible. This one arrive with a cracked and small missing portion of the plastic windscreen, on the left side. A friend had purchased this and complained about it and was given another.....so he gave me this one...... Terry
[img
[img
[img


Please Log in or Create an account to join the conversation.

More
12 years 3 months ago #12440 by buzzer999
Replied by buzzer999 on topic Factory Flaws
Hi Jan The search facility on this site only allows you to go back 12 months and there is nothing in that time frame for Factory Errors. Dave

Please Log in or Create an account to join the conversation.

More
12 years 2 months ago #12458 by dinkycollect
Replied by dinkycollect on topic Factory Flaws
This mint bus has no silver on the radiatot and headlights.

Please Log in or Create an account to join the conversation.

More
12 years 2 months ago #12459 by dinkycollect
Replied by dinkycollect on topic Factory Flaws
This Caravelle has two identical landing gear instead of having symetrical ones. Beware of the landing.

Please Log in or Create an account to join the conversation.

More
12 years 2 months ago #12460 by janwerner
Replied by janwerner on topic Factory Flaws
Hi Jacques, most (obvious) factory flaws are often mint. If the client didn't want it, or returned it to the shop, it was never played with anymore. After that it was stored in the back and a matter of just waiting a very long time for a foolish collector, who likes unusual things. Regards, Jan

Please Log in or Create an account to join the conversation.

More
12 years 1 month ago #12524 by dinkycollect
Replied by dinkycollect on topic Factory Flaws
The wing tips should be af the same blue as the body's top.

Please Log in or Create an account to join the conversation.

Time to create page: 0.522 seconds
Powered by Kunena Forum
Save
Cookies user preferences
We use cookies to ensure you to get the best experience on our website. If you decline the use of cookies, this website may not function as expected.
Accept all
Decline all
Analytics
Tools used to analyze the data to measure the effectiveness of a website and to understand how it works.
Google Analytics
Accept
Decline
Advertisement
If you accept, the ads on the page will be adapted to your preferences.
Google Ad
Accept
Decline